Cozy Game Restoration: Autocomplete at 99 Percent Not Finishing
Direct answer · November 10, 2026 original-source and version check
The October demo rule requires each dirt, ink, scratch and sticker layer to reach at least 99%; the overall average is not enough. If the full game shows 100% without autocomplete, check each layer and Accessibility before documenting the cartridge and build.
Jump straight to the steps ↓THE TASK
Autocomplete at 99 Percent Not Finishing
- 01
Check Accessibility > Autocomplete is enabled. Inspect the separate dirt, ink, scratches and stickers requirements; a displayed overall 100% by itself is not proof all four completion checks have passed.
- 02
For any specific layer below 99%, inspect edges, deep cartridge grooves and the back label. An independent English guide suggests a UV sweep and layer-appropriate cleaning tools, but these are community diagnostic ideas, not a GGClue tested fix.
- 03
If all four layers meet 99% on the current November full-game build and the cartridge will not complete, capture the on-screen percentages and item model and report a possible trigger bug; do not repeatedly scrape a clean surface without new evidence.
IMPORTANT LIMITS
What if your result is different?
The per-layer 99% rule comes from an October developer DEMO patch; the November full-game original player report remains unresolved. No guaranteed bug fix or screenshot has been independently tested.
EVIDENCE
Sources for Autocomplete at 99 Percent Not Finishing
- Original player question and replies: Autocomplete at 99 Percent Not Finishing
- Cozy Game Restoration on Steam
Evidence and version: November 10, 2026 original-source and version check
Why a displayed 100% may still fail to finish
The developer’s October 14 demo patch announcement specified that every layer—dirt, ink, scratches and stickers—must reach at least 99% for autocomplete. A combined 100% on one surface is therefore not by itself proof every layer is satisfied. The original Steam question remains a report, not a confirmed universal workaround; GGClue has not reproduced the state in the November full game.
Comparison with a dedicated English troubleshooting walkthrough
The Cozy Game Restoration 99% troubleshooting guide suggests checking an UV-light sweep, toothbrush grooves, polishing scratches and the reverse label. These are competitor suggestions, not official proof that they resolve every affected cartridge. The developer October demo change changed autocomplete from an overall average to 99% per layer; it does not demonstrate that a November full-game instance stuck at reported 100% is always player error. See the original player discussion for the unresolved report. GGClue needs a real screen showing the four layer values and failed completion before visual acceptance.
Diagnostic sequence: why 100% can still fail to finish
The October demo requirement refers to each separate dirt, ink, scratch and sticker layer reaching at least 99%, rather than a single displayed overall average. For a November full-game save that already displays 100%, first check Accessibility → Autocomplete and then inspect each individually tracked layer. Only repeat cleaning where the current UI indicates unfinished work. Do not grind an already complete-looking part with an unsupported hidden-pixel theory.
Branch A: any tracked layer is below its required threshold — finish that layer, including edges or ridges that remain visibly dirty. Branch B: all four layers satisfy the threshold but Autocomplete stays unavailable — record the exact object, version, setting and layer values; the original report does not prove a universal fix. Success: the actual task completion action registers, not simply a 100% visual counter. The same-question English troubleshooting page is a comparator, not evidence that an undocumented button exists.