Planet Zoo 2 · Reviewed Nov 10, 2026

Planet Zoo 2 Autosave Not Working: Planet Hub Fix and Safe Save Checks

Quick answer

Frontier fixed the Planet Hub autosave-timer reset in v1.0.6; Hotfix 1.0.7 was for the different Franchise Resume connection bug, and v1.0.8 changed Save Menu safeguards. In v1.0.10, check the Autosave Frequency slider, make a separate manual save and verify a new timestamped autosave after the interval actually selected; no patch restores progress that was never saved.

Version and source details

Guide context: Check the v1.0.10 Autosave Frequency slider and confirm a new timestamp. v1.0.6 fixed the Planet Hub timer reset; v1.0.7 fixed a separate Resume bug.

Game version and evidence scope: PC/console Planet Hub timer v1.0.6 Oct23; v1.0.8 Oct29 Save Menu safeguards; v1.0.10 Nov9 adds Autosave Frequency slider, source checked Nov10.

Last reviewed: Nov 10, 2026

Sources and evidence scope

  • Frontier official Update 1.0.8 announcementsofficial developer announcements index · Tier A · checked Nov 1, 2026

    Supports: Update 1.0.8 separates Save Menu entries by current location and highlights the loaded save. The Save Menu safeguard does not change the autosave interval.

  • Frontier official Update 1.0.6 patch notesofficial developer patch notes transcript · Tier A · checked Oct 25, 2026

    Supports: The Planet Hub autosave timer reset was fixed in Update 1.0.6.

  • Frontier official Update 1.0.7 patch notesofficial developer patch notes transcript · Tier A · checked Oct 25, 2026

    Supports: A separate Franchise Resume connection failure introduced in 1.0.6 was fixed by 1.0.7; no saved games lost in that specific issue.

  • Frontier Save/Load Error support articleofficial Windows support reference · Tier A · checked Oct 25, 2026

    Supports: The exact Windows Failure to Save error can have a different filesystem cause.

On this page12 sections

Is the Planet Hub autosave bug fixed?

Yes, for the specific timer-reset problem Frontier identified. Before October 23, entering the Planet Hub could reset the autosave timer and prevent the next autosave from firing. Frontier’s Update 1.0.6 patch notes list this exact defect as resolved. This changes the advice from the earlier October 20 Under Investigation announcement, when the fix was still being tested.

The patch does not promise that every platform, save file and separate cause of saving failure is fixed. If you are still missing new autosaves on a current build, preserve what opens, record exactly what happens and report the remaining issue.

Later Save Menu protection in Update 1.0.8

Update 1.0.8 later grouped saves from the current location separately and highlighted the save currently loaded. This helps reduce accidental overwrites; it is not a change to the Planet Hub autosave timer and does not restore an overwritten file. For the interface safeguard, see the Save Menu guide. For the separate two-crash loading fix, see the zoo-save loading guide. Frontier’s 1.0.8 announcement documents the later changes.

New in November 9 v1.0.10: Autosave Frequency is now adjustable

Frontier Update 1.0.10 added an Autosave Frequency slider to Settings. This is the most important current-build step missing from the older autosave answer. After safeguarding a copy with a new manual save, inspect the in-game slider and its displayed interval rather than assuming a fixed universal timing. Then play past that actually selected interval and check for a newer time-stamped autosave in My Saves. This confirms whether autosaves work in your specific zoo; it does not prove missing historical files can be reconstructed.

Same-task English comparator: Planet Zoo 2 Bugs & Known Issues separately distinguishes the original v1.0.6 bug from this v1.0.10 control, matching the developer changelog. GGClue still needs a rights-cleared current Settings screen and before/after autosave timestamp to meet screenshot-level parity.

Safe checks when your zoo still opens

  1. Check that your game has installed Update 1.0.6 or later. Hotfix 1.0.7 followed on the same day and fixes a separate Franchise Resume failure.
  2. Open the zoo you can still access. Before making large construction changes, create a manual save using the current game’s save controls.
  3. Open My Saves and confirm that the intended zoo and manual save are listed. Identify saves by the details shown in your build rather than guessing from similarly named entries.
  4. On v1.0.10 or newer, open Settings → Autosave Frequency and note the interval actually displayed. Continue play past that chosen interval, then check for a new time-stamped autosave. Do not invent a universal default or force a destructive experiment.
  5. If a new autosave never appears, record your platform, mode, installed version, timing of the Planet Hub visit and the My Saves state, then submit a report to the Frontier issue tracker.

Never delete or overwrite the only accessible save to see whether autosaving will resume. A manual save is a protection step, not a guarantee that progress from before the last successful save can be reconstructed.

Three similar-looking problems, three different answers

Your symptom Verified status Safe next step
Autosave timer seems to restart after entering Planet Hub Specific defect fixed by 1.0.6 Update; manually save current progress; recheck new autosaves
Clicking Resume for a Franchise zoo reports connection failure and blocks menus after 1.0.6 Separate regression fixed by 1.0.7 Install 1.0.7, or restart and enter via the Franchise mode button rather than Resume
Windows shows the exact error Failure to Save Frontier’s Windows support discusses a potentially missing Saved Games folder Follow Frontier’s specific support article; do not apply this PC step to consoles

For the second row, read the dedicated Franchise Resume connection error guide. Frontier explicitly says saved games were not lost because of that incident and instructs players not to delete their saves folder.

Windows-only: the exact “Failure to Save” message

This is not the Planet Hub autosave-timer issue. Frontier’s official Save/Load Error instructions identify a missing default Windows Saved Games folder as a possible cause of the explicit “Failure to Save” error.

  1. On Windows PC, open File Explorer and enter shell:SavedGames into the location bar.
  2. If Windows cannot open that folder, follow Frontier’s linked support article to inspect and, if necessary, restore the default Saved Games directory. The official article supplies a repair script; obtain it only from Frontier, review what it does, and do not run a script from an unrelated download or copy/paste site.
  3. If the folder exists, or restoring its location does not resolve the problem, contact Frontier with the exact message and installed version. Do not manually delete your last accessible save or invent a new folder path.

These Windows folder steps do not apply to PlayStation or Xbox. They also do not recreate progress that was never saved.

What if My Saves shows nothing?

Do not infer that your zoo was permanently erased. The October 23 Franchise incident temporarily caused apparently missing saves in some interfaces; it was not a deletion event according to Frontier. First separate the Resume regression from a missing manual/autosave record. If the problem persists on 1.0.7 or later, seek official support for your exact platform and symptoms. There is no verified universal file-restore procedure in the sources used here.

FAQ

Does installing 1.0.6 recover progress that was never saved?

No recovery promise follows from fixing an autosave timer. The notes say the timer issue was fixed, not that earlier unsaved play was reconstructed.

Should I delete the saves directory to force a reset?

No. Frontier explicitly warned against deleting saves during the 1.0.6 Franchise Resume incident, and there is no evidence it would repair missing autosaves.

Is the Wildlife Reserve release crash the same bug?

No. It was also addressed in Update 1.0.6, but releasing animals into a Franchise Wildlife Reserve is a separate task. See Wildlife Reserve crash help.

Independent player guide. Verified against official developer patch notes October 25, 2026; no personal recovery test claimed.

The earliest autosave fix, the later Save Menu safeguard, and last zoo load patch

Frontier v1.0.6 Oct23 fixed a Planet Hub transition resetting the autosave timer, preventing autosave from triggering; the same release introduced a distinct Franchise Resume regression addressed by v1.0.7 the same day. v1.0.8 Oct29 later grouped saves by location and highlighted the loaded save; these are manual Save Menu overwrite safeguards, not a promise of different autosave timing. v1.0.10 Nov9 fixed another crash while loading some zoos, not a guaranteed recovery for all files.

Test without data loss: make a new manual save in a unique slot; check My Saves after several ordinary game minutes; visit Planet Hub; return and wait past the configured autosave interval; verify a new timestamped autosave actually appears. Keep originals intact. If no autosave appears, record game mode, platform, timer, Build and Planet Hub transitions. Success is a real new autosave file/entry, not an unchanged menu highlight.

No GGClue owned save-game test or sensitive user save files are provided. A publishable screen capture should hide account IDs and show time/build and safe slot progression, not fabricate a backup recovery result.