Evidence boundary: Equipment names and example prices below are reported by Pro Game Guides on October 31, 2026, not independently measured by GGClue. The 1.0.5 building behavior is confirmed in the developer patch; individual port positions still need a first-party gameplay screenshot.
Test the cheapest working route first
- Get the Building Tool and select the Packager. The competitor’s published example price is $50 for the tool and $100 for the Packager; check the current shop before budgeting.
- Place the Packager near a short, clear path to the Hub intake. Identify the machine’s deposit side and capsule output. These are not interchangeable.
- Connect a Conveyor Belt from the Packager output, keeping every section oriented toward the Hub. The reported belt cost is $0.50 per metre and the equipment guide mentions segmented runs up to 30 metres; verify your build’s placement UI rather than treating these as permanent specifications.
- Attach the final section to the Hub’s actual outside receiving intake. A belt merely touching the Hub building or an unrelated port may not complete the delivery.
- Deposit a small amount of dust. Watch for a capsule leaving the Packager, reaching the intake and causing the expected credit change. Record the step at which the outcome differs.
- Once this minimal experiment works, extend the line or automate the collection stage. Do not troubleshoot a huge factory before a one-capsule test passes.
Choose the right automation stage
| Setup | Who collects dust? | How it reaches the Hub | Main failure to check |
|---|---|---|---|
| Packager + belt | You | Packager output → connected belt → Hub intake | Wrong output or disconnected belt |
| Robot Vacuum + dock/output system | Robot in its area | Compatible output route → Hub intake | Robot/dock output or empty assigned sector |
| Vehicle + Garage | Vehicle, then unload pad | Garage outfeed → connected belt → Hub intake | Garage silo outfeed or collector pad |
| J.O.O.N.A.S. + Capsule Catcher | J.O.O.N.A.S. | Catcher output → belt → Hub intake | Catcher grouping, full catcher or blocked downstream belt |
Do not confuse automation of collection with automation of delivery and sale. A Packager does only part of that workflow.
If the system fails, follow one capsule
- No capsule is made: Confirm actual dust entered the intended machine; check your interaction and its state.
- Capsule forms but never exits: Inspect the belt attached to the output, not just whether any belt exists near the Packager.
- Capsule moves halfway: Walk the belt one segment at a time until you find the first gap, wrong direction or blocked connection.
- Capsule reaches the Hub but money is unchanged: Confirm a connection to the receiving intake, not the outside wall. Re-test with one unit.
- Garage stores dust but nothing leaves: That is a different stage. See Garage Silo outfeed troubleshooting.
- J.O.O.N.A.S. selects the wrong receiver: Check the published nearest-group and fill-level logic in Capsule Catcher groups.
What changed with 1.0.5?
The developer describes flexible construction, free Move Mode and belt ports following relocated structures where they can reach. This does not mean an arbitrary moved base stays fully connected. After moving a machine or foundation, recheck both ends of every changed belt segment. The patch also adds a Garage Silo status message and smarter J.O.O.N.A.S. targeting; those features belong to their own diagnoses.
What a screenshot must prove
A useful step-by-step visual set needs: (A) the Packager and its readable deposit/output sides, (B) a belt attached to the real output, (C) the Hub’s receiving intake and its connected final belt, and (D) a before/after sale or balance confirmation. A flow diagram is helpful for explanation, but cannot replace these four actual UI/environment landmarks.
Sources and limits
- Equipment, price and screenshot-backed workflow from another publisher: https://progameguides.com/guides/how-to-auto-sell-dust-in-moon-sweepers/
- Developer 1.0.5 patch text: https://steamdb.info/patchnotes/26264480/
- Moon Sweepers hub and Move Mode.
Verification disclosure: GGClue did not run a game session or reproduce a successful sale; all visuals presently provided by GGClue are original explanatory diagrams, not screen captures.
Trace one capsule through all three required handoffs
The existing English automation guide’s first setup is dust → Packager → belt → Hub external intake. A Packager packages dust that reaches its own input; it does not automatically vacuum dust from every patch of ground. To identify a missing sale, produce one small known batch, check the Packager’s resulting capsule, verify that the conveyor is actually aligned with its output, then watch whether the Hub accepts that capsule at the correct intake. A large factory does not help if the initial belt output points at the wrong side of a machine.
The developer’s 1.0.5 note introduced more flexible machine placement, but does not prove every moved building’s conveyor connection remains valid. Success: the dust becomes a capsule, reaches the intake and generates the expected sale; a full Garage or a working Packager animation alone is insufficient. If a Garage silo cannot push dust into the belt, use the dedicated Garage outfeed diagnostic rather than guessing that buyers stopped paying.