Checked October 30, 2026 · Steam PC · No firsthand screenshot or claim of firsthand playtesting.
Move a machine and its foundation safely
- Check that the game is updated to 1.0.5 or later; controls described here were announced on October 28.
- Equip the building tool before pressing R. If R does not have the expected action, check the tool and whether you are already in another build state.
- Select the piece you actually want to relocate, not an adjacent support. The patch refers to a piece and everything standing on it; it does not promise every complex belt network will remain connected.
- Place it once the destination looks valid. For a no-cost rehearsal, use right-click to put it back rather than deleting it.
- After placing, inspect attached conveyors. Belts follow where their ports remain reachable, so a distant move may require reconnection.
Rotate and snap correctly
The Stone Press and similar machines can align with the foundation surface you target; rotation is in 90-degree steps ordinarily and 30-degree steps on hexagonal foundation shapes. Press F to switch to free placement, which may be useful when exact snapping is not the goal. This is not an endorsement of floating or unsupported builds in every situation.
If a relocation is refused
First distinguish a move operation from construction and removal. Then check whether the target foundation geometry and belt length can accommodate the piece. The 1.0.5 developer notes changed placement rules and fixed a specific adjacent-machine rejection; they do not establish the cause of every future placement message. Keep the wording of any error and the version number rather than guessing a universal repair.
FAQ
Will everything connected move with the foundation? Items standing on the selected piece are included. Belts follow where reachable; all distant connections are not guaranteed.
Does removing still cost 25%? No. The developer says removal now returns the entire build price.
Can you build before cleaning dust? Yes. In this patch, dusty ground no longer must be cleaned first.
Which button cancels the position change? Right-click puts the piece back; R/Esc exits Move Mode.
Related task guides
For a selling line that uses the moved machine, see the Packager-to-Hub dust setup. If the Garage stores dust but cannot send it onward, use the separate Garage outfeed diagnostic.
Source
Official Moon Sweepers 1.0.5 announcement. Buttons are documented official patch instructions; video/screenshot UI steps require separate current-client verification before illustrating them.